News

Touch screen is often used in electronic products, it will inevitably be a problem, I believe many people use the touch screen, are encountered in the touch screen can not be used because of the failure of the situation. So touch the screen how to repair these common faults? This article describes the type of […]

The general motor consists of two parts: the fixed part is called the stator, the rotating part is called the rotor. In addition there are end caps, fans, enclosures, machine bases, junction boxes and so on. The role of the stator is to generate a magnetic field and act as a mechanical support for the […]

For automation systems that use servo drives or variable frequency drives (VFDs), many customers do not understand the performance of their encoders. Some customers think that if they provide best-in-class encoders, the accuracy of the system will certainly be high. Sounds plausible? Yes, but there are other factors to consider. Encoder-based systems have three common […]

Encoder FAQs All measurements are a rough approximation of the “true” value, meaning that the measured value always has a certain amount of error from the “true” value. The size of such an error is what is commonly referred to as the measurement accuracy, which reflects the measurement The ability of the instrument system to […]

1, the cause of leakage problems In some cases the use of inverter control motor leakage problems occur, the leakage voltage ranging from tens of volts to 200 volts, here for the reasons for the failure of the theoretical analysis and description are as follows. According to the inverter control motor running function diagram (Figure […]

Incremental encoder output signal is a square wave signal, but also can be divided into incremental encoder with commutation signal and ordinary incremental encoder, ordinary incremental encoder with two-phase orthogonal square wave Pulse output signals A and B, and zero signal Z; incremental encoder with commutation signal in addition to the ABZ output signal, but […]