It is understood that many customers in the purchase of Mitsubishi servo motor, the most troublesome thing is the Mitsubishi servo motor selection problem. Because the general procurement staff are not professional industrial technology personnel, the servo motor specifications, and the degree of matching equipment and equipment are not very understanding. Then the following article for everyone to offer five in the Mitsubishi servo selection need to pay attention to the different points!
First, the moment frequency characteristics are different
Mitsubishi servo motor output torque with the speed rise and decline, and in the high speed will drop sharply, so the maximum working speed is generally 300 ~ 600RPM.
Second, low-frequency characteristics of different
Mitsubishi servo motor at low speed prone to low frequency vibration phenomenon. The vibration frequency is related to the load condition and the drive performance. It is generally believed that the vibration frequency is half of the motor no-load take-off frequency.
Third, the overload capacity is different
Mitsubishi servo motors generally do not have overload capacity. Mitsubishi servo motor has a strong overload capacity.
Fourth, the running performance is different
Mitsubishi servo motor control for the open-loop control, the starting frequency is too high or the load is too large prone to stealing or stall phenomenon, stop the high speed is prone to overshoot phenomenon, so to ensure its control accuracy, should be handled L, slow down the problem.
Fifth, the speed response performance is different
Mitsubishi servo motor from the static acceleration to the working speed (usually hundreds of turns per minute) need 200 to 400 milliseconds. Mitsubishi servo system to accelerate the performance better.
Above is the five Mitsubishi servo selection need to pay attention to the difference between the hope that the majority of procurement staff in the Mitsubishi servo motor selection help!

Leave a Reply

Your email address will not be published. Required fields are marked *