shape | Square shape |
---|---|
Detection method | Transmission type |
Detection distance | 7 m |
Standard detection object | Opaque body φ 10 mm or more |
Directional angle | Emitter: 3 to 15 ° Receiver: 3 to 15 ° |
light source | Red light emitting diode (emission wavelength: 700 nm) |
Power-supply voltage | DC 10 to 30 V (including ripple (pp) 10%) |
Current consumption | Projector: 20 mA or less (When turbo switch is ON: Approx. 15 mA increase) Receiver: 20 mA or less (When turbo switch is ON: Approximately 15 mA increase) |
Control output | NPN open collector DC 30 V or less Load current: 100 mA or less Residual voltage: 1 V or less |
action mode | ON at the time of incoming light / ON switching type at light blocking type |
Protection circuit | Output short circuit protection, power supply reverse connection protection |
Response time | 0.5 ms or less (operation / restoration) |
Sensitivity adjustment | 2 turn Endless · volume (with indicator) |
Self-diagnosis output function | Load supply voltage 30 VDC or less, load current 50 mA or less (residual voltage 1 V or less), open collector output type |
Timer function | OFF delay 0 ms to 100 ms |
Ambient illuminance to use | Incandescent lamp: 5000 lx or less, sunlight: 10000 lx or less |
Operating temperature limit | -25 to 55 ° C (with no icing or condensation) |
Storage temperature range | -40 to 70 ° C (with no icing or condensation) |
Ambient humidity range | At use: 35 to 85% Storage time: 35 to 95% (with no freezing or condensation) |
Insulation resistance | 20 MΩ or more (DC 500 V Mega) |
Withstand voltage | AC 1000 V 50/60 Hz 1 min |
Vibration (durability) | 10 to 55 Hz Double amplitude 1.5 mm X, Y, Z direction 2 h |
Impact (durability) | 500 m / s ** 2 X, Y, Z three times in each direction |
Protective structure | IEC standard: IP 67 NEMA 4X (limited to indoor use only) |
Connection method | Code pullout type (code length 2 m) |
Indicator light | Light indicator light (red), stability indicator light (green), power indicator light (red) |
Mass (packing state) | Approximately 150 g |
accessories | Instruction manual, Mounting bracket, Sensitivity adjustment driver, Volume cap |
Material | Case: Polybutylene terephthalate Lens part: Modified polyarylate Mounting bracket: Stainless steel (SUS 304) |