Detection method | Groove type | |
---|---|---|
format | Form E3S – GS3E4 | |
Detection distance | 30 mm | |
Standard detection object | Opaque body of φ 6 mm or more | |
Minimum detection object | φ 3 mm or more (black mark on transparent sheet) | |
Light source (emission wavelength) | Infrared light emitting diode (950 nm) | |
Power-supply voltage | DC 12 to 24 V ± 10% Ripple (pp) 10% or less | |
Current consumption | 40 mA or less | |
Control output | The following load supply voltage DC24V, load current 80mA max (residual voltage 2V or less), NPN voltage output type Light-ON / ON when light is interrupted cord connection switchable |
|
Protection circuit | Power reverse connection protection, output short circuit protection | |
Response time | Operation · Restoration: 1 ms or less each | |
Sensitivity adjustment | Single turn potentium | |
Ambient illuminance to use | Light receiving surface illuminance incandescent lamp: 3,000 lx, sunlight: 10,000 lx | |
Ambient temperature | Operating: -25 to + 55 ° C, at storage: -40 to + 70 ° C (with no freezing or condensation) | |
Ambient humidity | Operating: 35 to 85% RH, Storage: 35 to 95% RH (with no condensation) | |
Insulation resistance | 20 MΩ or more (DC 500 V Mega) | |
Withstand voltage | AC 1,000 V 50/60 Hz 1 min | |
Vibration (durability) | 10 to 55 Hz Double amplitude 1.5 mm X, Y, Z direction 2 h | |
Impact (durability) | 500 m / s 2 X, Y, Z 3 times in each direction | |
Protective structure | IEC standard IP 67 | |
Connection method | Code pullout type (standard code length 2 m) | |
Mass (packing state) | Approximately 330 g | |
Material | Case | Zinc die casting |
Lens part | Polycarbonate | |
Indicator light window | Polycarbonate | |
accessories | Adjustment driver, sensitivity adjustment knob, instruction manual |