E3T-SL11 Omron photoelectric switch

E3T-SL11

E3T-SL11 Omron photoelectric switch

SKU: 10 Category:
Shape Square type
Sensing method Limited Reflective
Sensing distance 5 mm to 15 mm (White paper 50 x 50 mm)
Minimum sensing object 0.15 mm dia. (at sensing distance 10 mm)
Differential distance 2 mm max.
Light source Red LED (Emission wave length: 650 nm)
Power supply voltage 12 to 24 VDC ±10% (ripple (p-p) 10% max.)
Current consumption 20 mA max.
Control output NPN open collector output
26.4 VDC max.
Load current: 50 mA max.
Residual voltage: 1 V max. (Load current Less than 10mA)/Residual voltage: 2 V max. (Load current 10 to 50 mA)
Operation mode Light-ON
Protective circuit Output short-cut protection
Output reverse polarity protection
Power supply reverse polarity protection
Mutual interference prevention
Response time 1 ms max. (Operate or reset)
Ambient illuminance Incandescent lamp: 5000 lux max., Sunlight: 10000 lux max.
Ambient temperature (Operating) -25 to 55 ℃
(with no icing or condensation)
Ambient temperature (Storage) -40 to 70 ℃
(with no icing or condensation)
Ambient humidity Operating: 35 to 85%
Storage: 35 to 95%
(with no icing or condensation)
Insulation resistance 20 MΩ min. at 500 VDC
Dielectric strength 1000 VAC at 50/60 Hz for 1 min
Vibration resistance 10 to 2000 Hz, 1.5-mm or 300 m/s**2 double amplitude for 0.5 hours each in X, Y, and Z directions
Shock resistance 1000 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection IEC: IP67
Connection method Pre-wired models (Cable length: 2 m)
Indicator Operation indicator (orange), Stability indicator (green)
Weight (packed state) Approx. 20 g
Material Case: PBT
Lens: Denatured Polyarylate
Display: Denatured Polyarylate
Accessories Instruction manual, Set screws for mounting (M2*14), Nuts