shape | Square |
---|---|
Detection method | Limited reflection type |
Detection distance | 5mm~30mm (white drawing paper 50×50mm) |
Minimum detection object | Φ0.15mm (detection distance 10mm) |
Poor | 6mm or less |
light source | Red LED (lighting wavelength: 650 nm) |
voltage | DC12~24V ±10% (ripple (pp) 10% or less) |
Current consumption | 20mA or less |
Control output | NPN open collector DC26.4V load current: Residual voltage below 50mA : (DC) 1V or less (load current less than 10mA) / residual voltage: (DC) 2V or less (load current 10 ~ 50mA) |
Action mode | ON when entering light |
Protection circuit | Load short circuit protection, output reverse connection protection, reverse power supply protection, mutual interference prevention |
Response time | 1ms or less (action/reset) |
Ambient illumination | Incandescent lamp: 5000lx or less, sunlight: 10000lx or less |
Ambient temperature | -25~55°C (no icing, condensation) |
Preservation of ambient temperature | -40~70°C (no icing, condensation) |
Ambient humidity range | When using: 35~85% storage: 35~95% (no icing, condensation) |
Insulation resistance | 20MΩ or more (DC500V megger) |
Withstand voltage | AC1000V 50/60Hz 1min |
Vibration (durable) | 10~2000Hz Double amplitude 1.5mm or 300m/s**2 X, Y, Z 0.5h in all directions |
Impact (durability) | 1000m/s**2 X, Y, Z 3 times in each direction |
Protection level | IEC standard: IP67 |
Connection method | Wire lead-out type (wire length: 2m) |
Indicator light | Action indicator (orange), steady indicator (green) |
Quality (after packaging) | About 20g |
Material | Housing: PBT lens section: Denatured polyaryl ester display: Denatured polyaryl ester |
annex | Instruction manual, mounting screws (M2×14), nuts |