E3Z-T81A Omron photoelectric switch

E3Z-T81A Omron photoelectric switch

Category: photoelectric switch

Shape	Square type
Sensing method	Through-beam type
Sensing distance	10 m max.
Standard sensing object	Opaque: 12 mm dia. min.
Directional angle	3 to 15 °
Light source	Red LED (660 nm)
Power supply voltage	12 to 24 VDC ±10% ripple (p-p) 10% max.
Current consumption	Emitter: 15 mA max. Receiver: 20 mA max.
Control output	PNP open collector 26.4 VDC max. Load current: 100 mA max. Residual voltage: 1 V max. (Load current Less than 10 mA), 2 V max. (Load current: 10 to 100 mA)
Operation mode	Light-ON/Dark-ON selectable
Protective circuit	Output short-circuit protection, Output reverse polarity protection, Power supply reverse polarity protection
Response time	1 ms max.(Operate or reset)
Sensitivity setting	Single-turn adjustment
Ambient illuminance	Incandescent lamp: 3000 lux max., Sunlight: 10000 lux max.
Ambient temperature	Operating: -25 to 55℃ Storage: -40 to 70℃
Ambient humidity	Operating: 35 to 85% Storage: 35 to 95%
Insulation resistance	20 MΩ min. (at 500 VDC)
Dielectric strength	1000 VAC 50/60 Hz 1 min
Vibration resistance	Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance	Destruction: 500 m/s**2 3 times each in X, Y and Z directions
Degree of protection	IEC: IP67
Connection method	Pre-wired models (Cable length: 2 m
Indicator	Operation indicator (orange), Stability indicator (green), Power indicator (orange)
Weight	Package: Approx. 120 g
Accessories	Instruction manual
Material	Case: Polybutylene terephthalate (PBT) Lens: Denatured Polyarylate

Latest News

2018-06-25

Low-voltage electrical appliance definition

Low-voltage electrical appliance definition Low-voltage electrical appliances refer to appliances with rated voltages below 1200V AC and 1500V DC. In China’s industrial control circuit, the most commonly used three-phase AC voltage level is 380V, and other voltage grades are only used in specific industry environments, such as 127V for electric drills under coal mines, 660V […]

2018-07-28

What effect does voltage and current have on the performance of stepper motors?

General stepper motor drivers are constant current chopping. So, in practical applications, what effect does the driver drive voltage and driver set current have on the performance of the stepper motor? In general: voltage affects speed and current affects torque. The torque frequency characteristics of stepper motors are all tested under a certain current and […]

2018-07-30

Common voltage electrical fault repair 丨 voltage circuit breaker contactor thermal relay

First, several maintenance examples of common voltage electrical faults 1, voltage circuit breaker failure If the contact is overheated, it can smell the distribution control cabinet. After checking, the moving contact is not fully inserted into the static contact, and the contact pressure is not enough, resulting in a decrease in the switch capacity and […]

2018-07-31

Introduction to Level Sensors The role, application and classification of level sensors

The level sensor is a branch of the level sensor. The level measurement is a branch in the level measurement. The level refers to the interface position between liquid, powdery solid and gas in the storage container or industrial production equipment. According to the detailed use, it is divided into liquid level sensor, level sensor […]

2018-08-01

Selection of resistors in circuit design and its role

1 basic parameters of the resistor: Engineers who are new to hardware circuit design may have a first impression of resistance. The resistance of the conductor described in the physics book to the current is called resistance. It is represented by the symbol R, in ohms, kiloohms, and megaohms. , KΩ, MΩ said. The main […]