| Categorise | Incremental Shaft model |
|---|---|
| Diameter | 25 dia. |
| Power supply voltage | DC5-5% to 12+10% V (ripple (p-p): 5% max.) |
| Current consumption | 30 mA DC max. |
| Resolution | 100 P/R |
| Inrush current | Approx. 9 A (Time: Approx. 0.3 ms) |
| Output phases | A, B and Z |
| Control output (Output type) | NPN open collector |
| Control output (Load power supply voltage) | 30 VDC max. |
| Control output (Load current) | 30 mA max. (Sink current) |
| Control output (Residual voltage) | 0.4 VDC max. (at sink current 30 mA) |
| Max. response frequency | 30 kHz |
| Phase difference on output | 90±45°between A and B |
| Rise and fall times of output | 1 µs max. (Cable length: 0.5 m, output voltage: 5 V, load resistance: 1 kΩ ) |
| Starting torque | 1 mN.m max. |
| Moment of inertia | 1 x 10**-7 kg.m**2 max. |
| Shaft loading | Radial: 10 N Thrust: 5 N |
| Max. permissible rotation | 5000 r/min |
| Ambient temperature | Operating: -10 to 55 ℃ Storage: -25 to 80 ℃ (with no icing) |
| Ambient humidity | Operating: 35 to 85% RH Storage: 35 to 85% RH (with no condensation) |
| Insulation resistance | Between charged parts and the case: 20 MΩ min. at 500 VDC |
| Dielectric strength | Between charged parts and the case: 500 VAC at 50/60 Hz for 1 min |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h |
| Shock resistance | 500 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC: IP50 |
| Connection method | Pre-wired models (Cable_length: 0.5 m) |
| Material (body) | Aluminum |
| Material (case) | Aluminum alloy |
| Material (shaft) | SUS420J2 |
| Material (mounting bracket) | Iron zinc plating |
| Weight (packed state) | Approx. 35 g |
| Accessories | Instruction manual, coupling, hex-head spanner and Servo mouting bracket |
Feature Product
Contact Us
Sunda Tech (HK) LTD
Gexmil Automation HK Limited
Address: 2607 Wenan centre NO.1010 wenjin north road Luohu District,shenzhen，China 518020
weihao_law
Line ID: automaitons