EE-SX671-WR Omron photoelectric switch

ee-sx671-wr

EE-SX671-WR Omron photoelectric switch

SKU: 10 Category: photoelectric switch

Type	Grooved Type (L-shaped)
Luminous method	Non-modulated
Sensing method	Through-beam type
Sensing distance	5 mm (slot width)
Operation mode	Dark-ON/Light-ON (selectable)
Standard sensing object	Opaque object (2 x 0.8 mm min.)
Differential distance elements	0.025 mm max.
Light source （Peak wavelength）	Infrared LED (940 nm)
Indicator	Light indicator (red)
Power supply voltage	5 to 24 VDC ±10% (ripple (p-p)10% max.)
Current consumption	35 mA max.
Control output （Output type）	NPN Open collector output
Control output （Load power supply voltage）	5 to 24 VDC
Control output （Load current）	100 mA max.
Control output （Residual voltage）	0.8 V max. (at 100 mA load current) 0.4 V max. (at 40 mA load current)
Response frequency elements	1 kHz min. (average 3 kHz) （See “Measurement condition of Response frequency elements”）
Illumination on the surface receiver	Fluorescent light: 1000 lx max.
Ambient temperature	Operating: -25 to 55 ℃ Storage: -30 to 80 ℃ （with no icing or condensation）
Ambient humidity	Operating: 5 to 85% RH Storage: 5 to 95% RH （with no icing or condensation）
Vibration resistance	20 to 2000 Hz, peak acceleration 100 m/s**2, 1.5-mm double amplitude 2 h each in X, Y, and Z directions (4 min periods)
Shock resistance	500 m/s**2, 3 times each in X, Y, and Z directions
Degree of protection （IEC60529）	IP50
Connection method	Pre-wired models
Cable length	1 m
Material	Case: Polybutylene phthalate (PBT) Emitter/Receiver Cover: Polycarbonate(PC)

Latest News

2018-06-25

Low-voltage electrical appliance definition

Low-voltage electrical appliance definition Low-voltage electrical appliances refer to appliances with rated voltages below 1200V AC and 1500V DC. In China’s industrial control circuit, the most commonly used three-phase AC voltage level is 380V, and other voltage grades are only used in specific industry environments, such as 127V for electric drills under coal mines, 660V […]

2018-07-28

What effect does voltage and current have on the performance of stepper motors?

General stepper motor drivers are constant current chopping. So, in practical applications, what effect does the driver drive voltage and driver set current have on the performance of the stepper motor? In general: voltage affects speed and current affects torque. The torque frequency characteristics of stepper motors are all tested under a certain current and […]

2018-07-30

Common voltage electrical fault repair 丨 voltage circuit breaker contactor thermal relay

First, several maintenance examples of common voltage electrical faults 1, voltage circuit breaker failure If the contact is overheated, it can smell the distribution control cabinet. After checking, the moving contact is not fully inserted into the static contact, and the contact pressure is not enough, resulting in a decrease in the switch capacity and […]

2018-07-31

Introduction to Level Sensors The role, application and classification of level sensors

The level sensor is a branch of the level sensor. The level measurement is a branch in the level measurement. The level refers to the interface position between liquid, powdery solid and gas in the storage container or industrial production equipment. According to the detailed use, it is divided into liquid level sensor, level sensor […]

2018-08-01

Selection of resistors in circuit design and its role

1 basic parameters of the resistor: Engineers who are new to hardware circuit design may have a first impression of resistance. The resistance of the conductor described in the physics book to the current is called resistance. It is represented by the symbol R, in ohms, kiloohms, and megaohms. , KΩ, MΩ said. The main […]