type | Groove type (T type) (groove center 7 mm) |
---|---|
Light emission method | DC light |
Detection method | Transmission type |
Detection distance | 5 mm (groove width) |
action mode | ON at lighting / ON at light input (switchable) |
Standard detection object | Opaque body of 2 × 0.8 mm or more |
Hysteretic | 0.025 mm or less |
Light source (peak emission wavelength) | Infrared light emitting diode (940 nm) |
Indicator light | Lighting when illuminated (red) |
Power-supply voltage | DC 5 to 24 V ± 10% (ripple (pp) 10% or less) |
Current consumption | 12 mA or less (when L terminal is open) |
Control output (output format) | NPN open collector output |
Control output (load supply voltage) | DC 5 to 24 V |
Control output (load current) | 100 mA or less |
Control output (residual voltage) | 0.8 V or less (at a load current of 100 mA) 0.4 V or less (at a load current of 40 mA) |
Protection circuit | Load short circuit protection |
Response frequency | 1 kHz or more (average value 3 kHz) (Refer to measurement condition tab of response frequency) |
Light receiving surface illuminance | Fluorescent lamp: 1000 lx or less |
Ambient temperature range | Operating: -25 to 55 ° C Storage: -30 to 80 ° C (with no icing or condensation) |
Ambient humidity range | Operating: 5 to 85% RH Storage: 5 to 95% RH (However, do not freeze or condensate) |
Vibration (durability) | 20 to 2000 Hz peak acceleration 100 m / s ** 2 multiple amplitude 1.5 mm X, Y, Z direction 2 h (4 min cycle) |
Impact resistance (durability) | 500 m / s ** 2 X, Y, Z three times in each direction |
Protective structure (IEC 60529) | IP50 |
Connection method | Connector type (Direct soldering possible) |
Material | Case: Polybutylene terephthalate (PBT) injecting / receiving part cover: polycarbonate (PC) |