ES-M2 keyence Separate amplifier proximity sensor

ES-M2 keyence Separate amplifier proximity sensor

Category: keyence

Model				ES-M2^*1
Type				One-line expansion system
Shape				Expansionunit
Operation mode				N.O./N.C. switch-selectable
Timer function				10-ms delay / timer OFF switchable^*2
Output				NPN
Output	Control output			NPN open collector 100 mA max. 40 V, residual voltage 1 V max.
Disconnection alarm output				―^*3
Response time				1 ms max.
Temperature characteristics				Within ±8% of detecting distance at +23°C 73.4°F when within 0 to 50°C 32 to 122°F temperature range
Sensitivity adjustment				25-turn trimmer
Protection circuit				Reverse power connection protection, output overcurrent protection, output surge protection
Rating	Power voltage			12 to 24 VDC, Ripple (P-P) 10 % or less
	Current/power consumption			25 mA max.
Environmental resistance	Ambient temperature			0 to +50 °C 32 to 122 °F^*4
	Relative humidity			35 to 85 % RH (No condensation)
Weight				Approx. 35 g (including nuts and 2-m 9.8′ cable)
^1 The ES-M1(P)/M2(P) cannot be connected to the EH-422, 430, 440 or 290. ^2 During N.O. operating configuration, the off delay timer is 10 ms. During N.C., the on delay timer is 10 ms. ^3 Broken connection warning output is not available on the ES-M2 (P). ^4 The ambient temperature changes according to the following conditions when expansion units are added. When adding units, always attach them to a DIN rail (metal plate) and set the output current to 20 mA or less. 1 to 10 expansion units: 0 to 50˚C 32 to 122˚F 11 to 16 expansion units: 0 to 45˚C 32 to 113˚F

Latest News

2018-06-25

Low-voltage electrical appliance definition

Low-voltage electrical appliance definition Low-voltage electrical appliances refer to appliances with rated voltages below 1200V AC and 1500V DC. In China’s industrial control circuit, the most commonly used three-phase AC voltage level is 380V, and other voltage grades are only used in specific industry environments, such as 127V for electric drills under coal mines, 660V […]

2018-07-28

What effect does voltage and current have on the performance of stepper motors?

General stepper motor drivers are constant current chopping. So, in practical applications, what effect does the driver drive voltage and driver set current have on the performance of the stepper motor? In general: voltage affects speed and current affects torque. The torque frequency characteristics of stepper motors are all tested under a certain current and […]

2018-07-30

Common voltage electrical fault repair 丨 voltage circuit breaker contactor thermal relay

First, several maintenance examples of common voltage electrical faults 1, voltage circuit breaker failure If the contact is overheated, it can smell the distribution control cabinet. After checking, the moving contact is not fully inserted into the static contact, and the contact pressure is not enough, resulting in a decrease in the switch capacity and […]

2018-07-31

Introduction to Level Sensors The role, application and classification of level sensors

The level sensor is a branch of the level sensor. The level measurement is a branch in the level measurement. The level refers to the interface position between liquid, powdery solid and gas in the storage container or industrial production equipment. According to the detailed use, it is divided into liquid level sensor, level sensor […]

2018-08-01

Selection of resistors in circuit design and its role

1 basic parameters of the resistor: Engineers who are new to hardware circuit design may have a first impression of resistance. The resistance of the conductor described in the physics book to the current is called resistance. It is represented by the symbol R, in ohms, kiloohms, and megaohms. , KΩ, MΩ said. The main […]