| Fixed power supply electricity | AC 100 to 240 V 50/60 Hz DC 100 to 125 V 20% or less |
|---|---|
| Electric power consumption | Priced power supply Electricity 85 ~ 110% |
| Amount of power consumption (when the electric appliance is ON) | 2 VA / 1.6 (AC 240 V at 60 Hz) |
| Amount of power consumption (when the electric appliance is OFF) | 1.3 VA / 1.1 (AC 240 V at 60 Hz) |
| Bad electricity | Priced power supply electricity less than 10% |
| Number of hours and hours | 18 |
| Setting time Fragrance (each range) | From 0.05 s to 1.2 s / 0.3 s to 3 s / 1.2 s to 12 s / 3 s to 30 s / 12 s to 120 s / 30 s to 300 s / 0.12 min to 1.2 min / 0.3 min to 3 min / 1.2 min to 12 min / 3 min to 30 min / 120 min / 30 min – 300 min / 0.12 h – 1.2 h / 0.3 h – 3 h / 1.2 h – 12 h / 3 h – 30 h / 12 h – 120 h / 30 h – 300 h |
| Motion pattern | Transport rolling railway, railroad crossing opening, railway opening and closing movement, interval, primary export |
| Refrain from export (type) | Ion Electric 2c |
| Refrain from export (contact export) | Switching capacity (cos φ = 1): AC 250 V 5 A / DC 30 V 5 A minimum application load: DC 5 V 10 mA (P level, reference value) |
| Operation / decimation method | Instantaneous action / limiting declination |
| Environmental temperature range | When used: at -10 to 55 ° C storage: -25 to 65 ° C |
| Environmental humidity range | When using: 35 to 85% |
| Operation time deviation | ± 0.2% or less (maximum in-time proportional proportion) (1.2 s in 3 s, in 3 s range intrinsic ± 0.2% ± 10 ms or less) |
| Setting error | -5 to 5% ± 50 ms or less (relative phase difference maximum) |
| Decimation time | 0.1 s or less |
| Electrical influence | ± 0.2% (maximum in-time proportional proportion) below (1.2 s in 3 s, in 3 s range intrinsic ± 0.2% ± 10 ms or less) |
| Temperature effect | ± 1% (maximally tolerable proportion of phase inversion) or less (1.2 s in existence, 3 s range ± 1% ± 10 ms or less) |
| Electrocatalyst | 100 MΩ (for DC500 V, 000 thousand European table) |
| Withstand voltage | 间Noriyuki Charging metal portion Azukahi Charging metal section: AC2000V 50 / 60Hz 1min copy system exports given operating circuit Noriyuki间: AC2000V 50 / 60Hz 1min 异极contact Noriyuki间: AC2000V 50 / 60Hz 1min non连续contact Noriyuki间: 1000 VAC 50/60 Hz 1 min |
| Pulse doge | Power supply terminal: 5 kV Conductive part terminal External Exposure Due to non – chargeable metal part: 5 kV |
| Anti-drought | Dynamic mimicry generator Generative directional noise (100 ns / 1 μs, 1 ns upward, 1 ns upward) ± 1.5 kV (power supply terminal), ± 600 V (import terminal) |
| Electrostatic tolerance | 8 kV (malfunction), 15 kV (crown) |
| Resistance to vibration (durability) | 10 – 55 Hz Sampling width 0.75 mm 3 directions 2 h each |
| Vibration damping (erratic operation) | 10 – 55 Hz Sampling width 0.5 mm 3 directions each 10 min |
| Damage to endurance (durability) | 1000 m / s ** 2, 6 th direction each 3 rd order |
| Impact resistance (erroneous operation) | 100 m / s ** 2, 6 th direction each third order |
| Machine life (electrical appliances export) | More than 20 million orders (unlimited downloading, opening frequency of 1800th / h) |
| Electricity Lifespan (Electrical Equipment Export) | 100 thousand order or more (AC 250 V 5 A, Electric Comprehension, Open Frequency Rate 1800th / h) |
| IP Level | IP 40 (Face plate surface part) |
| External connection method | 8 legs accession |
| Mass (body) | Approximately 90 g |
Feature Product
Contact Us
Sunda Tech (HK) LTD
Gexmil Automation HK Limited
Address: 2607 Wenan centre NO.1010 wenjin north road Luohu District,shenzhen，China 518020
weihao_law
Line ID: automaitons