|
MR-J2S
series
|
Servo amplifier type name
|
MR-J2S-700B
|
|
Corresponding servo motor type name
|
|
|
Servo amplifier
|
Control
circuit
power
|
Voltage, Frequency
|
Single phase AC 200 ~ 230V / 50, 60Hz
|
|
Allowable voltage fluctuation
|
Single phase AC170 ~ 253V
|
|
Allowable frequency variation
|
Within ± 5%
|
|
Input (W)
|
50
|
|
Main circuit power
|
Voltage, Frequency (Note 1)
|
Three phase AC 200 ~ 230V / 50, 60Hz (Note 2)
|
|
Allowable voltage fluctuation
|
Three phase AC 200 to 230 V: Three phase AC 170 to 253 V
|
|
Allowable frequency variation
|
Within ± 5%
|
|
Power supply capacity
|
|
|
Inrush current
|
|
|
Control method
|
Sinusoidal PWM control · Current control method
|
|
Dynamic brake
|
Built-in (Note 3)
|
|
Protection function
|
Over current shutdown , regeneration overvoltage shutdown, overload shutdown (electronic thermal), servo motor overheat protection, detector fault protection, regeneration fault protection, undervoltage, instantaneous power failure protection, overspeed protection,
|
|
Maximum command input during position control
|
Equivalent to 10Mpps
|
|
rescue
|
Forced cooling , open (IP00)
|
|
Environment
|
Main Temperature
|
0 to 55 ° C (not to be frozen), Storage: -20 to 65 ° C (not to be frozen)
|
|
Weekly humidity
|
90% RH or less (No condensation), Conservation: 90% RH or less (No condensation)
|
|
atmosphere
|
Indoors (no direct sunlight), corrosive gas, flammable gas, oil mist, dust free
|
|
Elevation / Vibration
|
Less than 1000m above sea level / 5.9m / s2 or below
|
|
Weight (kg)
|
7.2
|
weihao_law