MR-J3
series
|
Servo amplifier type name
|
MR-J3-10B
|
Corresponding motor type
|
|
Main circuit
power
|
Voltage and Frequency (Notes 1 and 2)
|
Three phase AC 200 ~ 230V / 50, 60Hz or single phase AC200 ~ 230V / 50, 60Hz (Note 10)
|
Allowable voltage fluctuation
|
Three phase AC 200 ~ 230V Three phase AC 170 ~ 253V
Single phase AC 200 ~ 230V Single phase AC 170 ~ 253V
|
Allowable frequency variation
|
Within ± 5%
|
Control
circuit
power
|
Voltage, Frequency
|
Single phase AC 200 ~ 230V / 50, 60Hz
|
Allowable voltage fluctuation
|
Single phase AC170 ~ 253V
|
Allowable frequency variation
|
Within ± 5%
|
Input (W)
|
30
|
Interface power
|
DC24V ± 10% (Required current capacity: 300mA (Note7))
|
Regenerative resistance
allowable regenerative
power (W)
(Note 3, 4)
|
Built-in resistors
|
|
When using standard accessories (Note 5 and 6)
|
|
Control method
|
Sinusoidal PWM control · Current control method
|
Dynamic brake
|
Built-in (Note 8)
|
Protection function
|
Over current shutdown, regeneration overvoltage shutdown, overload shutdown (electronic thermal), servo motor overheat protection, detector fault protection, regeneration fault protection, undervoltage, instantaneous power failure protection, overspeed protection,
|
rescue
|
Natural cooling, opening (IP00)
|
Environment
|
Ambient temperature (Note 9)
|
0 to 55 ° C (no freezing), storage: -20 to 65 ° C (no freezing)
|
Weekly humidity
|
90% RH or less (No condensation), Conservation: 90% RH or less (No condensation)
|
atmosphere
|
Indoors (no direct sunlight), corrosive gas, flammable gas, oil mist, dust free
|
Mark
|
Less than 1000m above sea level
|
vibration
|
5.9 ㎨ or less
|
Weight (Kg)
|
0.8
|