Separate Amplifier classification | Amplifier Unit |
---|---|
Power supply voltage | 12 to 24 VDC ±10% (ripple (p-p) 10% max.) |
Power consumption | 1080 mW max. (at 24 VDC, current consumption: 45 mA) |
Control output | PNP open collector output 26.4 VDC max. Load current: 50 mA max. Residual voltage: 1 V max. |
Operation mode | Light-ON/Dark-ON selectable |
Protective circuit | Mutual interference prevention (disabled at super-high-speed mode) |
Response time | 100 µs max. (Super-high-speed mode) 250 µs max. (High-speed mode) 1 ms max. (Standard mode) 4 ms max. (High-resolution mode) |
Self-diagnostic output | Equipped |
Timer function | Select from ON-delay, OFF-delay, or One-shot delay 1ms to 5s |
Ambient temperature (Operating) | -25 to 55 ℃ (Groups of 1 to 2 Sensors) -25 to 50 ℃ (Groups of 3 to 10 Sensors) -25 to 45 ℃ (Groups of 11 to 16 Sensors) (with no icing or condensation) |
Ambient temperature (Storage) | -30 to 70 ℃ (with no icing or condensation) |
Ambient humidity | Operating: 35 to 85% Storage: 35 to 85% (with no icing or condensation) |
Insulation resistance | 20 MΩ min. at 500 VDC |
Dielectric strength | 1000 VAC at 50/60 Hz for 1 min |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 500 m/s**2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC: IP50 |
Connection method | Pre-wired models (Cable length: 2 m) |
Indicator | Operation indicator (orange), Digital display |
Weight (packed state) | Approx. 100 g |
Material | Case: PBT Cover: Polycarbonate |
Amplifier unit/senso head of combination | E3C-LD[][], E3C-LR[][] |