Model | PR-M 51 N 3 | |||
type | Transmission | |||
shape | Mini Slim | |||
Output form | NPN | |||
Connection type | 3 m cable | |||
Detection distance | 1.2 m | |||
Control output number | 2 * 1 | |||
Output operation | Output 1 | ON when lighting | ||
Output 2 | ON when entering light | |||
Response time | Output 1 | 0.5 ms * 1 | ||
Output 2 | ON → OFF: 2.7 ms, OFF → ON: 0.5 ms * 1 | |||
Sensitivity adjustment | None | |||
Spot diameter | – | |||
light source | 4 element point light source red LED (650 nm) | |||
Mutual interference prevention function | – | |||
Indicator light | Output indicator light (orange), stable operation indicator light (green), transmissive projector: power indicator light (green) | |||
Control output | DC 30 V or less, 50 mA or less Leakage current: 0.3 mA or less when the load resistance is 3 kΩ 0.5 mA or less when the load resistance is 1 kΩ 1.5 mA or less when the load resistance is 0.2 kΩ 1.0 V or less when the load resistance is 10 mA or less 1.5 V Below 2.0 V when 30 to 50 mA |
|||
Protection circuit | Power supply reverse connection protection, output overcurrent protection, output surge protection, power supply surge protection | |||
Rating | Power-supply voltage | DC 10 to 30 V ripple (PP) including 10% | ||
Current consumption | Emitter: 11 mA Receiver: 16 mA |
|||
Environmental resistance | Protective structure | IP 67 (IEC 60529), IP 69 K (DIN 40050 – 9), 4 X, 6 P, 13 (NEMA 250) | ||
Ambient illuminance to use | Incandescent lamp 5,000 lx or less, Sunlight: 20,000 lx or less | |||
Operating ambient temperature | -25 to + 55 ° C (do not freeze) | |||
Storage ambient temperature | -25 to + 75 ° C | |||
Ambient operating humidity | 35 to 85% RH (noncondensing) | |||
Impact resistance | 1,000 m / s 2 , six times in X, Y, Z directions | |||
Anti-vibration | 10 to 55 Hz, multiple amplitude 1.5 mm, X, Y, Z direction 2 hours each | |||
Insulation resistance | 20 MΩ or more (DC 500 V) | |||
Withstand voltage | AC 1,000 V 50/60 Hz 1 min | |||
Material | Case: SUS 316L indicator light cover / lens cover: polysulfone code protector: polymethyl pentene filler: polyester resin |
|||
accessories | instruction manual | |||
mass | Approximately 90 g |