PZ-V71 keyence

PZ-V71

PZ-V71 keyence

SKU: 10 Category: keyence

Model				PZ-V71 ^{* 1}^{* 2}
type				Multi reflection type
Output type				NPN
Detection distance				20 to 900 mm (30 × 30 cm white paper)
Set distance				150 – 900 mm (30 x 30 cm blank paper)
light source				Infrared LED
Sensitivity adjustment				Autotuning
Response time				1 ms or less
Mode of operation				ON at the time of incoming light / ON at lighting ON switching (by wiring)
Indicator light				Output display … Orange LED, stable operation indicator … green LED
Control output				Open collector for both NPN output and PNP output Maximum 100 mA 24 V or less Residual voltage 1 V or less
Digital monitor				7 segments 3 digit red LED
Protection circuit				Power reverse connection protection, output overcurrent protection, output surge protection
Rating	Power-supply voltage			DC 12 – 24 V ± 10% Ripple (PP) 10% or less
	Power consumption			45 mA or less
Environmental resistance	Protective structure			IP 67
	Ambient illuminance to use			Incandescent lamp: 5,000 liters or less, Sunlight: 20,000 liters or less
	Operating ambient temperature			-20 to + 55 ° C (do not freeze)
	Ambient operating humidity			35 to 85% RH (noncondensing)
	Anti-vibration			10 to 55 Hz Multiple amplitude 1.5 mm X, Y, Z direction 2 hours in each direction
	Impact resistance			1000 m / s ² X, Y, Z directions 6 times in each direction
Case material				Glass reinforced resin
accessories				–
mass				Approximately 70 g (with code 2 m)

Latest News

2018-06-25

Low-voltage electrical appliance definition

Low-voltage electrical appliance definition Low-voltage electrical appliances refer to appliances with rated voltages below 1200V AC and 1500V DC. In China’s industrial control circuit, the most commonly used three-phase AC voltage level is 380V, and other voltage grades are only used in specific industry environments, such as 127V for electric drills under coal mines, 660V […]

2018-07-28

What effect does voltage and current have on the performance of stepper motors?

General stepper motor drivers are constant current chopping. So, in practical applications, what effect does the driver drive voltage and driver set current have on the performance of the stepper motor? In general: voltage affects speed and current affects torque. The torque frequency characteristics of stepper motors are all tested under a certain current and […]

2018-07-30

Common voltage electrical fault repair 丨 voltage circuit breaker contactor thermal relay

First, several maintenance examples of common voltage electrical faults 1, voltage circuit breaker failure If the contact is overheated, it can smell the distribution control cabinet. After checking, the moving contact is not fully inserted into the static contact, and the contact pressure is not enough, resulting in a decrease in the switch capacity and […]

2018-07-31

Introduction to Level Sensors The role, application and classification of level sensors

The level sensor is a branch of the level sensor. The level measurement is a branch in the level measurement. The level refers to the interface position between liquid, powdery solid and gas in the storage container or industrial production equipment. According to the detailed use, it is divided into liquid level sensor, level sensor […]

2018-08-01

Selection of resistors in circuit design and its role

1 basic parameters of the resistor: Engineers who are new to hardware circuit design may have a first impression of resistance. The resistance of the conductor described in the physics book to the current is called resistance. It is represented by the symbol R, in ohms, kiloohms, and megaohms. , KΩ, MΩ said. The main […]