SL-R11G keyence

SL-R11G Keyence
SL-R11G Keyence
SL-R11G Keyence
SL-R11G Keyence

SL-R11G keyence

SKU: 10 Category: keyence

Model				SL – R 11 G
Response speed FSD 1, 2				24 ms (including sensor response speed)
Combination sensor				SL-C series
FSD 1, 2				AC 230 V 4 A DC 30 V 2A (resistive load) AC 230 V 2A (COS ø = 0.3) (inductive load) DC 30 V 1A (COS ø = 0.3) (inductive load)
lifespan				Mechanical service life: 10 million times or more Electrical service life: 100 thousand times or more
Response speed at E-STOP input				20 ms
AUX				AC125V 0.5 A DC 30 V 2A (resistive load) AC 125 V 0.25 A (COS ø = 0.3) (inductive load) DC 30 V 1A (COS ø = 0.3) (inductive load)
Rating	Power-supply voltage			DC 24 V ± 10%, ripple (PP) 10% or less
	Current consumption			150 mA or less (DC 24 V, SL-R 11 G single unit)
Environmental resistance	Protective structure			IP20 (IEC 60529) Install in the control panel of IP 54 or more
	Storage ambient temperature			-10 to +60 ° C (do not freeze)
	Operating ambient temperature			-10 to +55 ° C (do not freeze)
	Storage ambient humidity			35 to 95% RH (noncondensing)
	Operating ambient humidity			35 to 85% RH (noncondensing)
	Anti-vibration			10 to 55 Hz, multiple amplitude 0.7 mm, 20 sweeps in each of X, Y, Z directions
	Impact resistance			100 m / s ² (about 10 G), 16 ms pulse, 1,000 times in X, Y, Z directions
Material				Polycarbonate

Latest News

2018-06-25

Low-voltage electrical appliance definition

Low-voltage electrical appliance definition Low-voltage electrical appliances refer to appliances with rated voltages below 1200V AC and 1500V DC. In China’s industrial control circuit, the most commonly used three-phase AC voltage level is 380V, and other voltage grades are only used in specific industry environments, such as 127V for electric drills under coal mines, 660V […]

2018-07-28

What effect does voltage and current have on the performance of stepper motors?

General stepper motor drivers are constant current chopping. So, in practical applications, what effect does the driver drive voltage and driver set current have on the performance of the stepper motor? In general: voltage affects speed and current affects torque. The torque frequency characteristics of stepper motors are all tested under a certain current and […]

2018-07-30

Common voltage electrical fault repair 丨 voltage circuit breaker contactor thermal relay

First, several maintenance examples of common voltage electrical faults 1, voltage circuit breaker failure If the contact is overheated, it can smell the distribution control cabinet. After checking, the moving contact is not fully inserted into the static contact, and the contact pressure is not enough, resulting in a decrease in the switch capacity and […]

2018-07-31

Introduction to Level Sensors The role, application and classification of level sensors

The level sensor is a branch of the level sensor. The level measurement is a branch in the level measurement. The level refers to the interface position between liquid, powdery solid and gas in the storage container or industrial production equipment. According to the detailed use, it is divided into liquid level sensor, level sensor […]

2018-08-01

Selection of resistors in circuit design and its role

1 basic parameters of the resistor: Engineers who are new to hardware circuit design may have a first impression of resistance. The resistance of the conductor described in the physics book to the current is called resistance. It is represented by the symbol R, in ohms, kiloohms, and megaohms. , KΩ, MΩ said. The main […]