| type | Square type unshielded type |
|---|---|
| Detection distance | 5 mm ± 10% |
| Set distance | 0 to 4 mm |
| Hysteretic | 10% or less of the detection distance |
| Detectable object | Magnetic metal (Detection distance of nonmagnetic metal decreases) |
| Standard detection object | Iron 18 × 18 × 1 mm |
| Type of power supply | DC 2 wire type |
| Power-supply voltage | 12 to 24 VDC (ripple (pp) 10% or less) |
| Operating voltage range | 10 to 30 VDC |
| Leak current | 0.8 mA or less |
| Control output (switching capacity) | 3 to 100 mA |
| Control output (residual voltage) | 3.3 V or less (load current 100 mA, cord length 2 m) |
| Indicator light | Operation indicator light (red), setting indicator light (green) |
| action mode | No |
| Protection circuit | Load short circuit protection, surge absorption |
| Ambient temperature range | At use: -25 to 70 ° C Storage: -25 to 70 ° C (with no freezing) |
| Ambient humidity range | When used: 35 to 95% RH Storage: 35 to 95% RH (with no condensation) |
| Influence of temperature | Change in detection distance within the temperature range of -25 to + 70 ° C is within ± 10% (based on the detection distance at 23 ° C) |
| Effect of voltage | Within the range of the rated voltage ± 15%, the change in the detection distance is within ± 2.5% (based on the detection distance at the rated power supply voltage) |
| Insulation resistance | Between charging unit and casing: 50 MΩ or more (DC 500 V mega) |
| Withstand voltage | Between charging unit and casing: AC 1000 V 50/60 Hz 1 min |
| Vibration (durability) | 10 to 55 Hz Double amplitude 1.5 mm X, Y, Z direction 2 h |
| Impact (durability) | 500 m / s ** 2 X, Y, Z three times in each direction |
| Protective structure | IEC standard: IP 67 Internal standard: oil resistant |
| Connection method | Code pullout type (Cord length: 2 m) |
| Mass (packing state) | Approximately 80 g |
| Material | Case: Heat resistant ABS detection surface: Heat resistant ABS |
| accessories | instruction manual |
Feature Product
Contact Us
Sunda Tech (HK) LTD
Gexmil Automation HK Limited
Address: 2607 Wenan centre NO.1010 wenjin north road Luohu District,shenzhen，China 518020
weihao_law
Line ID: automaitons