WLNJ-LD-N Omron limit switch

WLNJ-LD-N Omron limit switch

Category: limit switch

Shape / structure	Vertical vertical type
lifespan	General form
Actuator	Coil spring type φ 6.5 stainless steel coil spring
Rated frequency	50/60 Hz
Contact configuration	1a1b
load	Common load / Micro load shared
Switching ability (AC) / no inductive load	Rated load: 3 A (NC) 1.5 A (NO) Rated voltage: AC 250 V / resistance load: 10 A (NC) 10 A (NO) / lamp load: 2 A (NC) 1A (NO) Rated voltage: AC 500 V / Resistance load: 10 A (NC) 10 A (NO) / Lamp load: 1.5 A (NC) 0.8 A (NO)
Switching capacity (AC) / inductive load	Rated voltage: AC 125V / Inductive load: 10 A (NC) 10 A (NO) / Motor load: 5 A (NC) 2.5 A (NO) Rated voltage: AC 250 V / Inductive load: 10 A (NC) 10 A (NO) / Motor load: 3 A (NC) 1.5 A (NO) Rated voltage: AC 500 V / Inductive load: 3 A (NC) 3 A (NO) / Motor load: 1.5 A (NC) 0.8 A (NO)
Switching ability (DC) / no inductive load	Rated load: 6 A (NC) 3 A (NO) Rated voltage: DC 14 V / resistance load: 10 A (NC) 10 A (NO) / lamp load: 6 A NC) 3A (NO) rated voltage: DC30V / resistive load: 6A (NC) 6A (NO ) / lamp load: 4A (NC) 3A (NO ) rated voltage: DC125V / resistive load: 0.8A (NC) 0.8A ( (NO) / Lamp load: 0.2 A (NC) 0.2 A (NO) Rated voltage: DC 250 V / resistance load: 0.4 A (NC) 0.4 A (NO) / Lamp load: 0.1 A (NC)
Switching capacity (DC) / inductive load	Rated voltage: DC14 V / Inductive load: 10 A (NC) 10 A (NO) / Motor load: 6 A (NC) 6 A (NO) Rated voltage: DC 14 V / Inductive load: 10 A (NC) 10 A (NO) / Motor load: 6 A (NC) 6 A (NO) Rated voltage: DC 30 V / Inductive load: 6 A (NC) 6 A (NO) / Motor load: 4 A (NC) 4 A (NO) Rated voltage: DC 125 V / inductive load: 0.8 A (NC) 0.8 A Motor load: 0.2 A (NC) 0.2 A (NO) Rated voltage: DC 250 V / Inductive load: 0.4 A (NC) 0.4 A (NO) / Motor load: 0.1 A (NC) 0.1 A (NO)
Allowable inrush current	Normally closed (NC): 30 A Always open (NO): 20 A
Operation indicator light	LED (Operating lighting, switchable of non-operation time of lighting) Voltage: AC / DC115V, AC / DC10 ~ 24V leakage current: about 0.5mA, about 0.4mA
Conduit size	G1 / 2
Ground terminal	No ground terminal
Ambient temperature range	At use: 80 ° C max. Or less (Do not freeze)


Allowable operation frequency (mechanical)	120 times / min
Allowable operation frequency (electrical)	30 times / min
Contact resistance (Initial value)	25 mΩ or less (built-in switch only)
Insulation resistance	100 MΩ or more (DC 500 V mega)
Withstand voltage	Between terminals with the same polarity : AC 1000 V 50/60 Hz 1 min Between each terminal and earth : AC 2200 V 50/60 Hz 1 min Between each terminal and non-charging metal part: AC 2200 V 50/60 Hz 1 min
Durability (mechanical)	10 million times or more (temperature and humidity condition: 5 to 35 ° C., 40 to 70% RH)
Durability (electrical)	750,000 times or more (AC 250 V 3A) (temperature and humidity condition: 5 to 35 ° C, 40 to 70% RH)
Impact resistance (durability)	1000 m / s ** 2 or more
Protective structure	IP 67


Power required for operation (OF)	Standard value Maximum 1.47 N
Movement to action (PT)	Standard value 20 ± 10 mm
Operating characteristic condition	Measure at actuator tip

Latest News

2018-06-25

Low-voltage electrical appliance definition

Low-voltage electrical appliance definition Low-voltage electrical appliances refer to appliances with rated voltages below 1200V AC and 1500V DC. In China’s industrial control circuit, the most commonly used three-phase AC voltage level is 380V, and other voltage grades are only used in specific industry environments, such as 127V for electric drills under coal mines, 660V […]

2018-07-28

What effect does voltage and current have on the performance of stepper motors?

General stepper motor drivers are constant current chopping. So, in practical applications, what effect does the driver drive voltage and driver set current have on the performance of the stepper motor? In general: voltage affects speed and current affects torque. The torque frequency characteristics of stepper motors are all tested under a certain current and […]

2018-07-30

Common voltage electrical fault repair 丨 voltage circuit breaker contactor thermal relay

First, several maintenance examples of common voltage electrical faults 1, voltage circuit breaker failure If the contact is overheated, it can smell the distribution control cabinet. After checking, the moving contact is not fully inserted into the static contact, and the contact pressure is not enough, resulting in a decrease in the switch capacity and […]

2018-07-31

Introduction to Level Sensors The role, application and classification of level sensors

The level sensor is a branch of the level sensor. The level measurement is a branch in the level measurement. The level refers to the interface position between liquid, powdery solid and gas in the storage container or industrial production equipment. According to the detailed use, it is divided into liquid level sensor, level sensor […]

2018-08-01

Selection of resistors in circuit design and its role

1 basic parameters of the resistor: Engineers who are new to hardware circuit design may have a first impression of resistance. The resistance of the conductor described in the physics book to the current is called resistance. It is represented by the symbol R, in ohms, kiloohms, and megaohms. , KΩ, MΩ said. The main […]