E2C-JC4A Omron photoelectric switch

e2c-jc4a

E2C-JC4A Omron photoelectric switch

SKU: 10 Category: photoelectric switch

Type	Amplifier unit
Differential distance	10% max. of sensing distance
Power source	DC Three-wires models
Power supply voltage	12 to 24 VDC (ripple(p-p) 10% max.)
Operating voltage range	10 to 30 VDC
Current consumption	45 mA max.
Control output (Output type)	NPN open collector
Control output (Switching capacity)	100 mA
Control output (Residual voltage)	0.7 V (30 VDC max.)
Indicator	Detection indicator (red), Stability indicator (green)
Operation mode	NO/NC selectable
Ambient temperature	Operating: -10 to 55 ℃ Storage: -10 to 55 ℃ (no icing)
Ambient humidity	Operating: 35 to 85% Storage: 35 to 85% (no condensation)
Temperature influence	±10% max. of sensing distance in temperature range of -10 to +55 ℃ (As the basis for sensing distance of 23 ℃)
Voltage influence	±1% max. of sensing distance in rated voltage range ±20%. (As the basis for sensing distance at standard power voltage)
Insulation resistance	Between charged parts and the case: 50 MΩ min. at 500 VDC
Dielectric strength	Between charged parts and the case: 1,000 VAC 50/60 Hz for 1 min
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance	100 m/s**2 for 3 times each in X, Y, and Z directions
Connection method	Pre-wired models (Cable length: 2 m)
Weight (Packed state)	approx. 50 g
Accessories	Caution labels, Mounting bracket, instruction manual
Amplifier unit/sensor head of combination	E2C-CR8A, E2C-CR8B, E2C-X1A, E2C-C1A, E2C-X1R5A, E2C-X2A

Latest News

2018-06-25

Low-voltage electrical appliance definition

Low-voltage electrical appliance definition Low-voltage electrical appliances refer to appliances with rated voltages below 1200V AC and 1500V DC. In China’s industrial control circuit, the most commonly used three-phase AC voltage level is 380V, and other voltage grades are only used in specific industry environments, such as 127V for electric drills under coal mines, 660V […]

2018-07-28

What effect does voltage and current have on the performance of stepper motors?

General stepper motor drivers are constant current chopping. So, in practical applications, what effect does the driver drive voltage and driver set current have on the performance of the stepper motor? In general: voltage affects speed and current affects torque. The torque frequency characteristics of stepper motors are all tested under a certain current and […]

2018-07-30

Common voltage electrical fault repair 丨 voltage circuit breaker contactor thermal relay

First, several maintenance examples of common voltage electrical faults 1, voltage circuit breaker failure If the contact is overheated, it can smell the distribution control cabinet. After checking, the moving contact is not fully inserted into the static contact, and the contact pressure is not enough, resulting in a decrease in the switch capacity and […]

2018-07-31

Introduction to Level Sensors The role, application and classification of level sensors

The level sensor is a branch of the level sensor. The level measurement is a branch in the level measurement. The level refers to the interface position between liquid, powdery solid and gas in the storage container or industrial production equipment. According to the detailed use, it is divided into liquid level sensor, level sensor […]

2018-08-01

Selection of resistors in circuit design and its role

1 basic parameters of the resistor: Engineers who are new to hardware circuit design may have a first impression of resistance. The resistance of the conductor described in the physics book to the current is called resistance. It is represented by the symbol R, in ohms, kiloohms, and megaohms. , KΩ, MΩ said. The main […]