EM-014 keyence

EM-014

EM-014 keyence

SKU: 10 Category: keyence

Model				EM-014
type				Shield type (Can be embedded in metal)
shape				M14 Screw type
Detection distance				4.0 mm ± 10%
Detected object				Magnetic metal (For nonmagnetic metals, see the characteristic diagram)
Standard detection object (iron t = 1 mm)				15 × 15 mm
Hysteresis distance				10% or less of the detection distance
Response frequency				1.2 kHz
Mode of operation				No
Temperature characteristic				± 10% or less of the detection distance at + 23 ° C (-10 to + 70 ° C)
Output display				Red LED
Output type				NPN output
Control output				NPN open collector maximum 200 mA (40 V or less) Residual voltage 1 V or less
Head casing material				Shinku Chrome Plating
Rating	Power-supply voltage			DC 10.8 – 30 V ripple (PP) 10% or less ^{* 1}
	Current consumption			12 mA or less
Environmental resistance	Protective structure			IP 67
	Operating ambient temperature			-25 to + 80 ° C (do not freeze)
	Ambient operating humidity			35 to 95% RH
accessories				Nut × 2 (screw type only), toothed washer × 1 (screw type only), amplifier fixing bracket × 1
Weight (with nut and cord 2 m)				Approximately 60 g

Latest News

2018-06-25

Low-voltage electrical appliance definition

Low-voltage electrical appliance definition Low-voltage electrical appliances refer to appliances with rated voltages below 1200V AC and 1500V DC. In China’s industrial control circuit, the most commonly used three-phase AC voltage level is 380V, and other voltage grades are only used in specific industry environments, such as 127V for electric drills under coal mines, 660V […]

2018-07-28

What effect does voltage and current have on the performance of stepper motors?

General stepper motor drivers are constant current chopping. So, in practical applications, what effect does the driver drive voltage and driver set current have on the performance of the stepper motor? In general: voltage affects speed and current affects torque. The torque frequency characteristics of stepper motors are all tested under a certain current and […]

2018-07-30

Common voltage electrical fault repair 丨 voltage circuit breaker contactor thermal relay

First, several maintenance examples of common voltage electrical faults 1, voltage circuit breaker failure If the contact is overheated, it can smell the distribution control cabinet. After checking, the moving contact is not fully inserted into the static contact, and the contact pressure is not enough, resulting in a decrease in the switch capacity and […]

2018-07-31

Introduction to Level Sensors The role, application and classification of level sensors

The level sensor is a branch of the level sensor. The level measurement is a branch in the level measurement. The level refers to the interface position between liquid, powdery solid and gas in the storage container or industrial production equipment. According to the detailed use, it is divided into liquid level sensor, level sensor […]

2018-08-01

Selection of resistors in circuit design and its role

1 basic parameters of the resistor: Engineers who are new to hardware circuit design may have a first impression of resistance. The resistance of the conductor described in the physics book to the current is called resistance. It is represented by the symbol R, in ohms, kiloohms, and megaohms. , KΩ, MΩ said. The main […]