G3NA-220B omron relay

g3na-220b omron relay
g3na-220b omron relay

G3NA-220B omron relay

SKU: 10 Category: relay

Product classification	Solid State Relay for heater control
Operating rated voltage	100 to 120 VAC
Operating voltage range	75 to 132 VAC
Input impedance	36 kΩ±20%
Must operate voltage	75 VAC max.
Must release voltage	20 VAC min.
Isolation method	Photocoupler
Rated load voltage	24 to 240 VAC
Load voltage range	19 to 264 VAC
Load current	0.1 A to 20 A With heat sink at 40 ℃ 0.1 A to 4 A Without a heat sink at 40 ℃
Inrush current resistivity	220 A (60 Hz, 1 cycle) 220 A (60 Hz, 1 cycle)
Output ON voltage drop	1.6 V (RMS)
Leakage current	5 mA (at 100 VAC) 10 mA (at 200 VAC)
Ambient temperature	Operating: -30 to 80 ℃ Storage: -30 to 100 ℃ (with no icing or condensation)
Ambient humidity	Operating: 45 to 85%RH (with no icing or condensation)
Operate time	3/2 cycle of load power source + 1 ms max.
Release time	3/2 cycle of load power source + 1 ms max.
Zero cross function	Equipped
Indicator	Equipped
Insulation resistance	100 MΩ (at 500 VDC)
Dielectric strength	2500 V 50/60 Hz 1 min
Vibration resistance	10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance	1,000 m/s**2
Terminal structure	Screw terminal
Mounting	Screw mounting
Weight	Approx. 60 g

Latest News

2018-06-25

Low-voltage electrical appliance definition

Low-voltage electrical appliance definition Low-voltage electrical appliances refer to appliances with rated voltages below 1200V AC and 1500V DC. In China’s industrial control circuit, the most commonly used three-phase AC voltage level is 380V, and other voltage grades are only used in specific industry environments, such as 127V for electric drills under coal mines, 660V […]

2018-07-28

What effect does voltage and current have on the performance of stepper motors?

General stepper motor drivers are constant current chopping. So, in practical applications, what effect does the driver drive voltage and driver set current have on the performance of the stepper motor? In general: voltage affects speed and current affects torque. The torque frequency characteristics of stepper motors are all tested under a certain current and […]

2018-07-30

Common voltage electrical fault repair 丨 voltage circuit breaker contactor thermal relay

First, several maintenance examples of common voltage electrical faults 1, voltage circuit breaker failure If the contact is overheated, it can smell the distribution control cabinet. After checking, the moving contact is not fully inserted into the static contact, and the contact pressure is not enough, resulting in a decrease in the switch capacity and […]

2018-07-31

Introduction to Level Sensors The role, application and classification of level sensors

The level sensor is a branch of the level sensor. The level measurement is a branch in the level measurement. The level refers to the interface position between liquid, powdery solid and gas in the storage container or industrial production equipment. According to the detailed use, it is divided into liquid level sensor, level sensor […]

2018-08-01

Selection of resistors in circuit design and its role

1 basic parameters of the resistor: Engineers who are new to hardware circuit design may have a first impression of resistance. The resistance of the conductor described in the physics book to the current is called resistance. It is represented by the symbol R, in ohms, kiloohms, and megaohms. , KΩ, MΩ said. The main […]