HG-MR13 Mitsubishi servo motor

hg-mr13

HG-MR13 Mitsubishi servo motor

SKU: 10 Category:

 ●  Performance, characteristics

Servo amplifier type name Servo Motor Series HG-MR

 HG-MR13

MR-J4- 

MR-J4W-

MR-J4-10A MR-J4-10B    
MR-J4W2-22B MR-J4W2-44B MR-J4W3-222B MR-J4W3-444B
Power supply capacity * 1  [kVA]   0.3
Continuous characteristic Rated output [W]   100
Rated torque (Note 3) [Nm]   0.32
Maximum torque [Nm]   0.95
Rated speed [r / min]   3,000
Maximum rotation speed [r / min]   6,000
Instantaneous allowable rotational speed [r / min]   6,900
Power rating at continuous rated torque   Standard [kW / s]   33.8
  With electronic brake [kW / s]   28.0
Rated current [A]   0.8
Maximum current [A]   2.5
Regenerative braking 
 frequency * 2
  MR-J4- [times / min]   (Note 4)
  MR-J4W- [times / min]   3640
Moment of inertia J   Standard [X10 -4 kg.m 2 ]   0.0300
With electronic brake [X10 -4kg.m 2 ]   0.0362
Recommended load inertia moment ratio (Note 1)   30 times or less
Speed, position detector   Absolute position. Incremental common 22-bit encoder (Servo motor 1 revolution resolution: 4,194,304p / rev)
Oil chamber   None (Oil seal servo moto is also available. (HG-MR_J)
Heat-resistant class   130 (B)
rescue   Full natural cooling (protection class: IP65) (Note 2)
Environmental conditions * 3  Ambient temperature   0 to 40 ° C (no freezing), storage: -15 to 70 ° C (no freezing)
 Ambient humidity   80% RH or less (No condensation), Conservation: 90% RH or less (No condensation)
 Environment   Indoors (not exposed to direct sunlight), corrosive gas, flammable gas, oil mist, dust free
 Elevation   Less than 1000m above sea level
 Vibration * 4   X: 49 m / s 2 Y: 49 m / s 2
Vibration class   V10 * 6
 Allowable load of shaft * 5  L [mm]   25
 Radial [N]   88
 Trust [N]   59
mass  Standard [kg]   0.54
 With electronic brake [kg]   0.74