IL-065 keyence

IL-065 Keyence Sensor heads
IL-065 Keyence Sensor heads
IL-065 Keyence Sensor heads
IL-065 Keyence Sensor heads

IL-065 keyence

SKU: 10 Category: keyence

Model				IL-065
Reference distance				65 mm
Measured distance				55 – 105 mm
light source	type			Red semiconductor laser wavelength: 655 nm (visible light)
	Laser class			Class 2 laser products (FDA (CDRH) Part 1040.10 ^{* 1} , IEC 60825-1)
	output			560 μW
Spot diameter (at reference distance)				About 550 × 1750 μm
Linearity				± 0.1% of FS (when used at 55 to 75 mm) ^{* 2}^{* 3}
Repeatability				2 μm ^{* 4}
Sampling period				0.33 / 1/2/5 ms (4 steps variable)
Operation indicator light				Laser projection warning light: green LED, analog range indication light: orange LED, reference distance indication light: red / green LED
Temperature characteristic				0.06% of FS / ° C ^{* 3}
Environmental resistance	Protective structure			IP 67
	Ambient illuminance to use			Incandescent lamp: 7500 lx ^{* 5}
	Operating ambient temperature			-10 to + 50 ° C (no condensation, no freezing)
	Ambient operating humidity			35 to 85% RH (noncondensing)
	Anti-vibration			10 ~ 55Hz Double amplitude 1.5mm XYZ 2 hours in each direction
	Pollution degree			3
Material				Body case: PBT, metal part: SUS 304, packing: NBR, lens cover: glass, cable: PVC
mass				Approximately 75 g

Latest News

2018-06-25

Low-voltage electrical appliance definition

Low-voltage electrical appliance definition Low-voltage electrical appliances refer to appliances with rated voltages below 1200V AC and 1500V DC. In China’s industrial control circuit, the most commonly used three-phase AC voltage level is 380V, and other voltage grades are only used in specific industry environments, such as 127V for electric drills under coal mines, 660V […]

2018-07-28

What effect does voltage and current have on the performance of stepper motors?

General stepper motor drivers are constant current chopping. So, in practical applications, what effect does the driver drive voltage and driver set current have on the performance of the stepper motor? In general: voltage affects speed and current affects torque. The torque frequency characteristics of stepper motors are all tested under a certain current and […]

2018-07-30

Common voltage electrical fault repair 丨 voltage circuit breaker contactor thermal relay

First, several maintenance examples of common voltage electrical faults 1, voltage circuit breaker failure If the contact is overheated, it can smell the distribution control cabinet. After checking, the moving contact is not fully inserted into the static contact, and the contact pressure is not enough, resulting in a decrease in the switch capacity and […]

2018-07-31

Introduction to Level Sensors The role, application and classification of level sensors

The level sensor is a branch of the level sensor. The level measurement is a branch in the level measurement. The level refers to the interface position between liquid, powdery solid and gas in the storage container or industrial production equipment. According to the detailed use, it is divided into liquid level sensor, level sensor […]

2018-08-01

Selection of resistors in circuit design and its role

1 basic parameters of the resistor: Engineers who are new to hardware circuit design may have a first impression of resistance. The resistance of the conductor described in the physics book to the current is called resistance. It is represented by the symbol R, in ohms, kiloohms, and megaohms. , KΩ, MΩ said. The main […]