E3C-LD11 OMRON photoelectric sensor

E3C-LD11

E3C-LD11 OMRON photoelectric sensor

SKU: 10 Category: photoelectric switch

shape	Square shape
Amplifier separation classification	The sensor head
Detection method	Diffuse reflection type
Detection distance	30 mm to 700 mm (standard mode, white drawing paper) 30 mm to 1000 mm (high precision mode, white drawing paper) 30 mm to 250 mm (fastest mode, white drawing paper)
Projected spot diameter	0.8 mm or less (distance: ~ 300 mm)
light source	Visible semiconductor laser (emission wavelength: 650 nm)
Laser class	IEC: Class 2, FDA: Class 2, JIS: Class 2
Ambient illuminance to use	Incandescent lamp: 3000 lx or less
Operating temperature limit	-10 to 55 ° C (with no icing or condensation)
Storage temperature range	-25 to 70 ° C (with no icing or condensation)
Ambient humidity range	At use: 35 to 85% Storage time: 35 to 85% (with no freezing or condensation)
Insulation resistance	20 MΩ or more (DC 500 V Mega)
Withstand voltage	AC 1000 V 50/60 Hz 1 min
Vibration (durability)	10 to 150 Hz Multiple amplitude 0.7 mm X, Y, Z in each direction 80 min
Impact (durability)	300 m / s ** 2 6 directions 3 times
Protective structure	IEC standard: IP 40
Connection method	Connector relay type (code length 2 m)
Indicator light	LDON indicator light (green), operation indicator light (orange)
Mass (packing state)	Approximately 85 g
accessories	Instruction manual, laser warning label (English)
Material	Case: ABS cover: ABS front filter: methacrylic resin
Combination amplifier / head	E3C-LDA [] []

Latest News

2018-06-25

Low-voltage electrical appliance definition

Low-voltage electrical appliance definition Low-voltage electrical appliances refer to appliances with rated voltages below 1200V AC and 1500V DC. In China’s industrial control circuit, the most commonly used three-phase AC voltage level is 380V, and other voltage grades are only used in specific industry environments, such as 127V for electric drills under coal mines, 660V […]

2018-07-28

What effect does voltage and current have on the performance of stepper motors?

General stepper motor drivers are constant current chopping. So, in practical applications, what effect does the driver drive voltage and driver set current have on the performance of the stepper motor? In general: voltage affects speed and current affects torque. The torque frequency characteristics of stepper motors are all tested under a certain current and […]

2018-07-30

Common voltage electrical fault repair 丨 voltage circuit breaker contactor thermal relay

First, several maintenance examples of common voltage electrical faults 1, voltage circuit breaker failure If the contact is overheated, it can smell the distribution control cabinet. After checking, the moving contact is not fully inserted into the static contact, and the contact pressure is not enough, resulting in a decrease in the switch capacity and […]

2018-07-31

Introduction to Level Sensors The role, application and classification of level sensors

The level sensor is a branch of the level sensor. The level measurement is a branch in the level measurement. The level refers to the interface position between liquid, powdery solid and gas in the storage container or industrial production equipment. According to the detailed use, it is divided into liquid level sensor, level sensor […]

2018-08-01

Selection of resistors in circuit design and its role

1 basic parameters of the resistor: Engineers who are new to hardware circuit design may have a first impression of resistance. The resistance of the conductor described in the physics book to the current is called resistance. It is represented by the symbol R, in ohms, kiloohms, and megaohms. , KΩ, MΩ said. The main […]