PZ2-42 keyence

PZ2-42

PZ2-42 keyence

SKU: 10 Category: keyence

Model				PZ 2-42
type				Diffuse reflection type (short distance)
Detection distance				100 mm (100 × 100 mm white paper)
light source				Red LED
Detected object				Transparent / opaque body
Hysteresis distance				20% or less of the detection distance
Sensitivity adjustment				One rotation trimmer (240 °)
Response time				1ms or less
Mode of operation				ON when entering light / ON lighting ON switch switching
Indicator light				Output display · Power supply indication ^{* 1} : Red LED stable operation display: Green LED
Control output				Maximum open collector for both NPN output and PNP output 100 mA (40 V or less) Residual voltage 1 V or less
Protection circuit				Reverse connection protection · Overcurrent protection · Surge absorption
Rating	Power-supply voltage			DC 12 to 24 V ± 10% Ripple (PP) 10% or less
	Current consumption			35 mA or less
Environmental resistance	Protective structure			IP 67 (sensor body only)
	Ambient illuminance to use			Incandescent lamp: 5000 lx or less, sunlight: 20000 lx or less
	Operating ambient temperature			-20 to +55 ° C (do not freeze)
	Ambient operating humidity			35 to 85% RH (noncondensing)
	Anti-vibration			10 to 55 Hz Multiple amplitude 1.5 mm X, Y, Z in each direction 2 hours
	Impact resistance			1000 m / s ² X, Y, Z directions 6 times in each direction
Case material				Glass reinforced resin
accessories				Mounting bracket × 1 Mounting screw × 2 Plate nut × 1
mass				About 50 g (with connector code 2 m)

Latest News

2018-06-25

Low-voltage electrical appliance definition

Low-voltage electrical appliance definition Low-voltage electrical appliances refer to appliances with rated voltages below 1200V AC and 1500V DC. In China’s industrial control circuit, the most commonly used three-phase AC voltage level is 380V, and other voltage grades are only used in specific industry environments, such as 127V for electric drills under coal mines, 660V […]

2018-07-28

What effect does voltage and current have on the performance of stepper motors?

General stepper motor drivers are constant current chopping. So, in practical applications, what effect does the driver drive voltage and driver set current have on the performance of the stepper motor? In general: voltage affects speed and current affects torque. The torque frequency characteristics of stepper motors are all tested under a certain current and […]

2018-07-30

Common voltage electrical fault repair 丨 voltage circuit breaker contactor thermal relay

First, several maintenance examples of common voltage electrical faults 1, voltage circuit breaker failure If the contact is overheated, it can smell the distribution control cabinet. After checking, the moving contact is not fully inserted into the static contact, and the contact pressure is not enough, resulting in a decrease in the switch capacity and […]

2018-07-31

Introduction to Level Sensors The role, application and classification of level sensors

The level sensor is a branch of the level sensor. The level measurement is a branch in the level measurement. The level refers to the interface position between liquid, powdery solid and gas in the storage container or industrial production equipment. According to the detailed use, it is divided into liquid level sensor, level sensor […]

2018-08-01

Selection of resistors in circuit design and its role

1 basic parameters of the resistor: Engineers who are new to hardware circuit design may have a first impression of resistance. The resistance of the conductor described in the physics book to the current is called resistance. It is represented by the symbol R, in ohms, kiloohms, and megaohms. , KΩ, MΩ said. The main […]