All posts by: a74

As a mechanical auxiliary operating element Panasonic servo motor, when you want to change the parameters of the servo controller, but do not know where to start, the following Xiaobian to teach you about Panasonic servo motor inversion method. Panasonic servo motor how to reverse as follows: 1. Select the appropriate control method (speed control, […]

The crystal diode is actually a P-N junction, which has unidirectional conductivity and can make the alternating current into direct current. This effect is called rectification. The so-called unidirectional conductivity is that the diode is turned on by the forward voltage under the action of the forward voltage, and the diode is not turned on […]

Due to the complicated programming of the CNC lathe, in order to make the programmed program interchangeable for the same type of machine tool, it also makes the programming simple, the name of the axis and the positive and negative direction of its motion. The International Organization for Standardization has unified the standard coordinate system. […]

In the selection and debugging of the servo system, the inertia problem is often encountered. The specific performance is as follows: In the selection of the servo system, in addition to factors such as the torque and rated speed of the motor, we also need to calculate the inertia of the mechanical system converted to […]

First, the installation direction and spacing The back side of MR-JE-40B~MR-JE-100B is equipped with a regenerative resistor. The temperature of the regenerative resistor may rise by 100 °C relative to the ambient temperature. Please take into account the heat dissipation, installation location and use of wires when configuring. 1, the installation interval of the servo […]

It is understood that many customers in the purchase of Mitsubishi servo motor, the most troublesome point is the selection of Mitsubishi servo motor. Because the general procurement personnel are not professional industrial control technicians, the specifications of the servo motor and the matching degree with the machine equipment are not very well understood. So […]