All posts by: a74

These modules typically have a microprocessor that controls the position, velocity and acceleration of moving objects. It can control linear or rotary motion, single or multi-axis motion. They combine motion control with PLC‘s sequential control functions and are widely used in machine tools, assembly machinery and other applications. The position control generally adopts closed-loop control […]

As a mechanical auxiliary operating element Panasonic servo motor, when you want to change the parameters of the servo controller, but do not know where to start, this article describes the Panasonic servo motor reversal method. How to reverse the Panasonic servo motor is as follows: 1. Select the appropriate control method (speed control, torque […]

The specific implementation methods can be as follows: 1. Directly connect to the FX2N programming port, using Mitsubishi’s built-in FX2N programming port protocol. This method does not require any setup and programming on the FX2N. It only needs to be programmed on the Profibus master station to continuously read and write slave data. The FX2N […]

Question 1: What is the function of the two knobs on the E3Z-D61? One is the motion selection switch, which switches between the blackout ON and the incoming light ON, and the other switch is a sensitivity adjustment knob for adjusting the detection distance. Question 2: Does the E3Z-R61 come with a retroreflective sheeting? A […]

1. What are the conditions for juxtaposition of two transformers? (1) the same ratio; (2) The short circuit impedance is the same; (3) The wiring group is the same; (4) The phase sequence is the same; 2. What are the cooling methods of the transformer? (1) oil immersion from cold; (2) oil immersion and air […]

The actuator is an indispensable part of the industrial process control automatic regulation system. The actuator used depends entirely on the valve, and the actuator is only the drive. The actuators configured by the regulating valve are nothing more than the pneumatic actuator, the electric actuator, and the hydraulic actuator (electro-hydraulic actuator). Accordingly, the regulating […]